Emulsiderm Emollient
SUMMARY OF PRODUCT CHARACTERISTICS
1 NAME OF THE MEDICINAL PRODUCT
Emulsiderm Emollient
2. QUALITATIVE AND QUANTITATIVE COMPOSITION
Liquid Paraffin 25.0% w/w
Isopropyl Myristate 25.0% w/w
Benzalkonium Chloride 0.5% w/w
(as Benzalkonium Chloride Solution)
For excipients see section 6.1.
3. PHARMACEUTICAL FORM
Pale blue cutaneous emulsion and bath additive.
4. CLINICAL PARTICULARS
4.1. Therapeutic indications
An antimicrobial bath emollient for use as an aid in the treatment of dry and pruritic skin conditions, especially eczema/dermatitis, ichthyosis or xeroderma. It permits the rehydration of the keratin by replacing lost lipids, and its antiseptic properties assist in overcoming secondary infection.
4.2. Posology and method of administration
Adults, including the elderly and children:
For use in the bath:
Add 7 - 30 ml Emulsiderm to a bath of warm water (more or less according to the size of the bath and individual patient requirements).
1 litre bottle - use graduated measuring cup provided.
50 - 500 ml bottles - V to 2 capfuls.
Soak for 5 - 10 minutes. Pat dry.
For application to the skin:
Rub a small amount of undiluted emollient into the dry areas of skin until absorbed.
4.3. Contraindications
Sensitivity to any of the ingredients.
4.4. Special warnings and precautions for use
Keep away from the eyes.
For external use only.
Keep out of the reach and sight of children.
Take care to avoid slipping in the bath.
4.5. Interactions with other medicinal products and other forms of interaction
None known.
4.6. Pregnancy and lactation
No known side effects.
4.7. Effects on ability to drive and use machines
None known.
4.8 Undesirable effects
Although the emollient has been specially formulated for use on dry or problem skin, in the unlikely event of a reaction discontinue treatment.
These reactions are very rare (<1/10,000 based on spontaneous reporting) and may be irritant or allergic in nature. Reactions have been observed occasionally when used excessively as a leave-on application in areas of folded skin such as the anogenital area.
Reporting of suspected adverse reactions
Reporting suspected adverse reactions after authorisation of the medicinal product is important. It allows continued monitoring of the benefit/risk balance of the medicinal product. Healthcare professionals are asked to report any suspected adverse reactions via the Yellow Card Scheme at: www.mhra.gov.uk/yellowcard.
4.9. Overdose
Not applicable.
5. PHARMACOLOGICAL PROPERTIES
5.1. Pharmacodynamic properties
For dry skin conditions it is important to add an emollient to the bath water. Emulsiderm contains 50% of oils emulsified in water as well as the well-known antiseptic, benzalkonium chloride which assists in overcoming secondary infection.
5.2. Pharmacokinetic properties
Emulsiderm contains 0.5% of the quaternary ammonium antiseptic, benzalkonium chloride. The large positively charged cation is readily adsorbed from the formulation onto negatively charged bacterial cell surfaces, thereby conferring substantial antimicrobial activity. Even at extended dilution, it is particularly effective against Staphylococcus aureus, a bacterium which is known to colonise the skin in large numbers in patients with eczema, especially atopic eczema. Apart from its emollient properties, Emulsiderm therefore also helps to prevent and overcome secondary infection which may exacerbate the eczematous condition.
5.3. Preclinical safety data
The safety and efficacy of the emollients (liquid paraffin and isopropyl myristate) and the antiseptic (benzalkonium chloride) in topical dosage forms have been well established over many years of widespread clinical usage.
PHARMACEUTICAL PARTICULARS
6.
6.1. List of excipients
Sorbitan Stearate Polysorbate 60
Industrial Methylated Spirit 95%
Methylthioninium Chloride Purified Water.
6.2. Incompatibilities
None known.
6.3. Shelf life
36 months in unopened container.
6.4. Special precautions for storage
Do not store above 25°C. Always replace the cap after use.
6.5 Nature and contents of container
a) 30 ml high density polyethylene bottle fitted with low density
polyethylene dispensing plug and Bakelite screw cap with low density polyethylene liner, or
50, 100, 125, 150, 200, 250, 300, 350 or 500 ml high density polyethylene bottle fitted with low density polyethylene dispensing plug and spigotted polypropylene screw cap, or
1000 ml high density polyethylene bottle and high density polyethylene screw cap with low density polyethylene liner.
For bottle sizes greater than the unit dose (30 ml), the screw cap incorporates a 10 ml or 15 ml measure, or a 30 ml measuring cup is supplied.
b) 10 ml paper/polyethylene/foil/polyethylene laminate sachet.
(Packaged into unit cartons in appropriate multiples to match the above bottle capacities)
6.6 Special precautions for disposal
Not applicable
7 MARKETING AUTHORISATION HOLDER
Diomed Developments Limited,
T/A Dermal Laboratories,
Tatmore Place,
Hitchin,
Hertfordshire SG4 7QR United Kingdom.
8. MARKETING AUTHORISATION NUMBER
PL: 00173/0036.
9 DATE OF FIRST AUTHORISATION/RENEWAL OF THE AUTHORISATION
13/07/2009
10 DATE OF REVISION OF THE TEXT
January 2015