Essential Waitrose Dry Tickly Cough Glycerin 0.75 G/5 Ml Oral Solution
FAQ. Technical Manager/Supplier 3
«■
Have set 'Tesco's' as brief however, similar products state 'Tesco' in about this product section. Please advise.
t>
About This Product
Tesco's Dry Tickly Cough Syrup Glycerin, Lemon and Honey is taken to relieve the symptoms of tickly coughs and sore throats.
Dosage
Warnings
Syrup for oral use. Shake the bottle before use.
Adults and children over 12 years: Take one or two 5 ml spoonfuls (5ml to 10ml).
Children from 6 to 12 years: Take one 5ml spoonful. Children from 1 to 5 years: Take half a 5ml spoonful (2.5ml). The above doses may be taken up to 4 times daily.
Please wipe bottle neck after use.
Do not give to children under 1 year.
patients with diabetes mellitus. This medicinal product contains small amounts of ethanol (alcohol), less than 100mg per 10ml dose.
Side Effects
Prolonged use may cause tooth decay or stomach upset. Reporting of side effects If you get any side effects, talk to your doctor, pharmacist or nurse. This includes any possible side effects not listed in this label. You can also report side effects directly via the Yellow Card Scheme at: www.mhra.gov.uk/yellowcard. By reporting side effects you can help provide more
in
o
Soothes tickly coughs and
sore throats 200 ml
FAQ. Design
Line width altered to minumum print spec of 0.2mm. Please confirm.
PLEASE NOTE: No TPNB number.
If this number is not supplied, the file will not be released to the printer.
Scale guide
Ocm
10
Do not use if you are allergic to any of the ingredients or if you have difficulty digesting glucose or sucrose.
Do not use if you are taking any other products containing potassium tartrate, carbonates or bicarbonates.
Consult your doctor or pharmacist before use if you are pregnant or breastfeeding. If you have been told by your doctor that you have an intolerance to some sugars, contact your doctor before using this medicinal product. Contains 5g of a mixture of sucrose, glucose and fructose per 10ml dose. This should be taken into account in
|
information on the safety of medicines. | |
|
Active Ingredients |
; |
|
Glycerin 0.75g per 5ml. | |
|
Other Ingredients |
varnish free area
Sucrose, Honey, Glucose, Citric Acid E330, Lemon Flavour, Lime Flavour, Sodium Benzoate E211 and Purified Water.
Storage
Keep out of the reach and sight of children.
Do not store above 25°C.
Keep out of direct sunlight.
Manufacturer and Product Licence holder: Bell, Sons & Co (Druggists) Ltd., Southport, PR9 9AL. Produced for:
Tesco Stores Ltd., Cheshunt EN8 9SL. SC4457 PL3105/0057
FAQ. Technical Manager/Supplier 1
Please confirm varnish, previous states clear varnish.
i tescodesign.com you are accepting that the oracle/supplier number and charged the cost as per the Tesco Price Matrix. As per existing process, r any retouching, proofing, delivery and print run attendance as required.
ARTWORK VERSION No.
DAI E
OPERATOR
16/12/2014
20/01/2015
CF-KH
MLL
REPRO
VERSION No. X
Specification
Job details
Tesco job reference: TPNB/Range number
000000000
Job description: Dry Tickly Cough Syrup - Label
Project type: Redesign
Category: Healthcare Range: HC - Bells MHRA Amends - Roll In
Process: Flexo
Substrate: TBC
Packaging Type: Label
Cutter Guide Ref: 65mm x 169mm Overall Dimensions: 169 mm x 65 mm Artwork Scale: 100%
Line Spec (mm): Pos:0.15mm Neg:0.2mm
FIR Compliant: N/A
Min Point Size Used: 6.6pt
TBC
VARNISH
CUTTER
All print must be sealed as a minimum requirement. Special varnishes will be referenced above.
|
Barcode approval | |
|
Approved |
Failed |
|
Reason | |
|
EAN Number: |
5051140401283 |
|
BWR: |
-20 |
|
Magnification: |
80% |
|
Spec version: |
As previous T13348 |
Invoice codes
FCALAB, AM
Approval
Design:
Category:
Pre-production manager:
Printer please read
Internal studio reference
Supplier information
Oracle Code Printer information
Contact information
Bells Heathcare
7696
Label Art (Flexo)
70 - 74 Broomhill Road, Tallagh Industrial Estate Dublin 24 Ireland
Tesco TM: Celine Linney
Design Manager: Claire Payne PM Contact: Karen Waller
Design Agency: N/A
PQM for Spot colour evaluation
(Printer will be evaluated under below criteria)
All measurements will be digital inclusive of varnish and substrate. NOTE: Measurements taken pre-lamination
Device: Spectrophotometer (Xrite Exact or Spectro Eye) Netprofiled Software: Colour IQC (All measurements taken via software, not directly from device)
Illuminate: D50 Whitebase: Absolute Angle: 2 Degrees Filter: None Delta E Formula: 2000 Tolerance: <2.00
NOTE: Pantone colours will be evaluated to digital Pantone + libraries (Do not visually evaluate to pantone book) Special colours will be evaluated to cxf data (this will be provided with hard copy visual sample) Sample request:
Please provide full press sheet and 6 fully die-cut
Sign off: Please check full contents/details before approving this artwork.
The Artwork Agency will not be liable for any errors or omissions after client approval.
Tesco would like to draw attention to pink notes. If they have not been answered by the relevant parties we believe this to mean the note is not relevant and does not need to be acted upon.
No responsibility will be taken by the Artwork Agency for any anomalies arising before, during or after going to plate or print as a result of not answering these queries.
How to view this PDF
Adjust your preferences within Acrobat as follows: Edit Menu>Preferences>Page Display>Check Overprint Preview is ON (or Off until it displays correctly). This PDF may contain White/Varnish Separations that will be displayed as a solid colour, if you need these separations turned off this can be done as follows:
View Menu> Navigation Panels> Layers, you can then turn off layers that relate to White/Varnish.
To Supplier:
Please check this proof for:
1. Correct cutter / machine drawing and date stamp area etc.
2. Correct orientation.
3. Correct photography (if applicable).
4. Any technical information and back of pack details.
To Printer:
Please check this proof for:
1. Correct cutter / machine drawing and date stamp area etc.
2. Correct orientation.
3. Number of colours.
4. Any technical information e.g. bleeds or non print areas etc.
5. Minimum type sizes.
6. Any pre-press issues e.g. rationalisation of colours, Repro specifications, proofing requirements and digital format requirements.
IT IS THE PRINTER'S RESPONSIBILITY TO APPLY ANGLES & LPI PLEASE NOTE: Due to the speed of the approval process, the Artwork Agency will NOT wait for approval before progressing to repro, but any late amends at repro stage could delay the launch and will incur costs.
A
FAQ. Design
2
Have set 'Tesco's' as brief however, similar products state 'Tesco' in about this product section. Please advise.
• • • •• • •• • ••
• • • • • •• • • •
• • • • •
• •••• •• •• ••
varnish free area
Line width altered to minumum print spec of 0.2mm. Please confirm.
PLEASE NOTE: No TPNB number.
If this number is not supplied, the file will not be released to the printer.
FAQ. Technical Manager/Supplier 1
Please confirm varnish, previous states clear varnish.
Scale guide
10
n tescodesign.com you are accepting that the oracle/supplier number and charged the cost as per the Tesco Price Matrix. As per existing process, r any retouching, proofing, delivery and print run attendance as required.
ARTWORK VERSION No.
REPRO
VERSION No. X
Specification
DATE
OPERATOR
16/12/2014 CF-KH 20/01/2015 MLL
Job details
Tesco job reference: TPNB/Range number
000000000
Job description: Dry Tickly Cough Syrup - Label
Project type: Redesign
Category: Healthcare Range: HC - Bells MHRA Amends - Roll In
Process: Flexo
Substrate: TBC
Packaging Type: Label
Cutter Guide Ref: 65mm x 169mm Overall Dimensions: 169mm x 65mm Artwork Scale: 100%
Line Spec (mm): Pos:0.15mm Neg:0.2mm
FIR Compliant: N/A
Min Point Size Used: 6.6pt
TBC
VARNISH
CUTTER
All print must be sealed as a minimum requirement. Special varnishes will be referenced above.
|
Barcode approval | |
|
Approved |
Failed |
|
Reason | |
|
EAN Number: |
5051140401283 |
|
BWR: |
-20 |
|
Magnification: |
80% |
|
Spec version: |
As previous T13348 |
Invoice codes
FCALAB, AM
Approval
Design:
Category:
Pre-production manager:
Printer please read
Internal studio reference
Supplier information
Oracle Code
Printer information
Contact information
Bells Heathcare
7696
Label Art (Flexo)
70 - 74 Broomhill Road, Tallagh Industrial Estate Dublin 24 Ireland
Tesco TM: Celine Linney
Design Manager: Claire Payne PM Contact: Karen Waller
Design Agency: N/A
PQM for Spot colour evaluation
(Printer will be evaluated under below criteria)
All measurements will be digital inclusive of varnish and substrate. NOTE: Measurements taken pre-lamination Device: Spectrophotometer (Xrite Exact or Spectro Eye) Netprofiled Software: Colour IQC (All measurements taken via software, not directly from device)
Illuminate: D50 Whitebase: Absolute Angle: 2 Degrees Filter: None Delta E Formula: 2000 Tolerance: <2.00
NOTE: Pantone colours will be evaluated to digital Pantone + libraries (Do not visually evaluate to pantone book) Special colours will be evaluated to cxf data (this will be provided with hard copy visual sample) Sample request:
Please provide full press sheet and 6 fully die-cut
Sign off: Please check full contents/details before approving this artwork.
The Artwork Agency will not be liable for any errors or omissions after client approval.
Tesco would like to draw attention to pink notes. If they have not been answered by the relevant parties we believe this to mean the note is not relevant and does not need to be acted upon.
No responsibility will be taken by the Artwork Agency for any anomalies arising before, during or after going to plate or print as a result of not answering these queries.
How to view this PDF
Adjust your preferences within Acrobat as follows: Edit Menu>Preferences>Page Display>Check Overprint Preview is ON (or Off until it displays correctly). This PDF may contain White/Varnish Separations that will be displayed as a solid colour, if you need these separations turned off this can be done as follows:
View Menu> Navigation Panels> Layers, you can then turn off layers that relate to White/Varnish.
To Supplier:
Please check this proof for:
1. Correct cutter / machine drawing and date stamp area etc.
2. Correct orientation.
3. Correct photography (if applicable).
4. Any technical information and back of pack details.
To Printer:
Please check this proof for:
1. Correct cutter / machine drawing and date stamp area etc.
2. Correct orientation.
3. Number of colours.
4. Any technical information e.g. bleeds or non print areas etc.
5. Minimum type sizes.
6. Any pre-press issues e.g. rationalisation of colours, Repro specifications, proofing requirements and digital format requirements.
IT IS THE PRINTER'S RESPONSIBILITY TO APPLY ANGLES & LPI PLEASE NOTE: Due to the speed of the approval process, the Artwork Agency will NOT wait for approval before progressing to repro, but any late amends at repro stage could delay the launch and will incur costs.
Have set 'Tesco's' as brief however, similar products state 'Tesco' in about this product section. Please advise.
About This Product
Tesco's Dry Tickly Cough Syrup Glycerin, Lemon and Honey is taken to relieve the symptoms of tickly coughs and sore throats.
Warnings
Dosage
Syrup for oral use. Shake the bottle before use.
Adults and children over 12 years: Take one or two 5 ml •spoonfuls (5ml to 10ml).
Children from 6 to 12 years: Take one 5ml spoonful. Children from 1 to 5 years: Take half a 5ml spoonful (2.5ml). The above doses may be taken up to 4 times daily.
Please wipe bottle neck after use.
Do not give to children under 1 year.
Do not use if you are allergic to any of the ingredients or if you have difficulty digesting glucose or sucrose.
Do not use if you are taking any other products containing potassium tartrate, carbonates or bicarbonates.
Consult your doctor or pharmacist before use if you are pregnant or breastfeeding. If you have been told by your doctor that you have an intolerance to some sugars, contact your doctor before using this medicinal product. Contains 5g of a mixture of sucrose, glucose and fructose per 10ml dose. This should be taken into account in
patients with diabetes mellitus. This medicinal product contains small amounts of ethanol (alcohol), less than 100mg per 10ml dose.
Prolonged use may cause tooth decay or stomach upset. Reporting of side effects If you get any side effects, talk to your doctor, pharmacist or nurse. This includes any possible side effects not listed in this label. You can also report side effects directly via the Yellow Card Scheme at: www.mhra.gov.uk/yellowcard. By reporting side effects you can help provide more information on the safety of medicines.
Active Ingredients
Glycerin 0.75g per 5ml.
Other Ingredients
Sucrose, Honey, Glucose, Citric Acid E330, Lemon Flavour, Lime Flavour, Sodium Benzoate E211 and Purified Water.
Storage
Keep out of the reach and sight of children.
Do not store above 25°C.
Keep out of direct sunlight.
in
o
Manufacturer and Product Licence holder: Bell, Sons & Co (Druggists) Ltd., Southport, PR9 9AL. Produced for:
Tesco Stores Ltd., Cheshunt EN8 9SL. SC4457 PL3105/0057
varnish free area
Line width altered to minumum print spec of 0.2mm. Please confirm.
PLEASE NOTE: No TPNB number.
If this number is not supplied, the file will not be released to the printer.
FAQ. Technical Manager/Supplier 1
Please confirm varnish, previous states clear varnish.
Scale guide
Ocm
10
i tescodesign.com you are accepting that the oracle/supplier number and charged the cost as per the Tesco Price Matrix. As per existing process, r any retouching, proofing, delivery and print run attendance as required.
ARTWORK VERSION No.
DAI E
OPERATOR
16/12/2014
20/01/2015
CF-KH
MLL
REPRO
VERSION No. X
Specification
Job details
Tesco job reference: TPNB/Range number
000000000
Job description: Dry Tickly Cough Syrup - Label
Project type: Redesign
Category: Healthcare Range: HC - Bells MHRA Amends - Roll In
Process: Flexo
Substrate: TBC
Packaging Type: Label
Cutter Guide Ref: 65mm x 169mm Overall Dimensions: 169 mm x 65 mm Artwork Scale: 100%
Line Spec (mm): Pos:0.15mm Neg:0.2mm
FIR Compliant: N/A
Min Point Size Used: 6.6pt
TBC
VARNISH
CUTTER
All print must be sealed as a minimum requirement. Special varnishes will be referenced above.
|
Barcode approval | |
|
Approved |
Failed |
|
Reason | |
|
EAN Number: |
5051140401283 |
|
BWR: |
-20 |
|
Magnification: |
80% |
|
Spec version: |
As previous T13348 |
Invoice codes
FCALAB, AM
Approval
Design:
Category:
Pre-production manager:
Printer please read
Internal studio reference
Supplier information
Oracle Code Printer information
Contact information
Bells Heathcare
7696
Label Art (Flexo)
70 - 74 Broomhill Road, Tallagh Industrial Estate Dublin 24 Ireland
Tesco TM: Celine Linney
Design Manager: Claire Payne PM Contact: Karen Waller
Design Agency: N/A
PQM for Spot colour evaluation
(Printer will be evaluated under below criteria)
All measurements will be digital inclusive of varnish and substrate. NOTE: Measurements taken pre-lamination
Device: Spectrophotometer (Xrite Exact or Spectro Eye) Netprofiled Software: Colour IQC (All measurements taken via software, not directly from device)
Illuminate: D50 Whitebase: Absolute Angle: 2 Degrees Filter: None Delta E Formula: 2000 Tolerance: <2.00
NOTE: Pantone colours will be evaluated to digital Pantone + libraries (Do not visually evaluate to pantone book) Special colours will be evaluated to cxf data (this will be provided with hard copy visual sample) Sample request:
Please provide full press sheet and 6 fully die-cut
Sign off: Please check full contents/details before approving this artwork.
The Artwork Agency will not be liable for any errors or omissions after client approval.
Tesco would like to draw attention to pink notes. If they have not been answered by the relevant parties we believe this to mean the note is not relevant and does not need to be acted upon.
No responsibility will be taken by the Artwork Agency for any anomalies arising before, during or after going to plate or print as a result of not answering these queries.
How to view this PDF
Adjust your preferences within Acrobat as follows: Edit Menu>Preferences>Page Display>Check Overprint Preview is ON (or Off until it displays correctly). This PDF may contain White/Varnish Separations that will be displayed as a solid colour, if you need these separations turned off this can be done as follows:
View Menu> Navigation Panels> Layers, you can then turn off layers that relate to White/Varnish.
To Supplier:
Please check this proof for:
1. Correct cutter / machine drawing and date stamp area etc.
2. Correct orientation.
3. Correct photography (if applicable).
4. Any technical information and back of pack details.
To Printer:
Please check this proof for:
1. Correct cutter / machine drawing and date stamp area etc.
2. Correct orientation.
3. Number of colours.
4. Any technical information e.g. bleeds or non print areas etc.
5. Minimum type sizes.
6. Any pre-press issues e.g. rationalisation of colours, Repro specifications, proofing requirements and digital format requirements.
IT IS THE PRINTER'S RESPONSIBILITY TO APPLY ANGLES & LPI PLEASE NOTE: Due to the speed of the approval process, the Artwork Agency will NOT wait for approval before progressing to repro, but any late amends at repro stage could delay the launch and will incur costs.
A
iyfi)
v
H®i ranra
Scale guide
Ocm 1 2 3 4 5 6 7 8 9 10
By submitting your comments on tescodesign.com you are accepting that the oracle/supplier number and charges are correct. You will be charged the cost as per the Tesco Price Matrix. As per existing process, additional costs will be added for any retouching, proofing, delivery and print run attendance as required.
ARTWORK VERSION No.
REPRO
VERSION No. X
Specification
DATE
OPERATOR
16/12/2014 CF-KH 20/01/2015 MLL
Job details
Tesco job reference: TPNB/Range number
000000000
Job description: Dry Tickly Cough Syrup - Label
Project type: Redesign
Category: Healthcare Range: HC - Bells MHRA Amends - Roll In
Process: Flexo
Substrate: TBC
Packaging Type: Label
Cutter Guide Ref: 65mm x 169mm Overall Dimensions: 169mm x 65mm Artwork Scale: 100%
Line Spec (mm): Pos:0.15mm Neg:0.2mm
FIR Compliant: N/A
Min Point Size Used: 6.6pt
All print must be sealed as a minimum requirement. Special varnishes will be referenced above.
|
Barcode approval | |
|
Approved |
Failed |
|
Reason | |
|
EAN Number: |
5051140401283 |
|
BWR: |
-20 |
|
Magnification: |
80% |
|
Spec version: |
As previous T13348 |
Invoice codes
FCALAB, AM
Approval
Design:
Category:
Pre-production manager:
Printer please read
Internal studio reference
Supplier information
Oracle Code
Printer information
Contact information
Bells Heathcare
7696
Label Art (Flexo)
70 - 74 Broomhill Road, Tallagh Industrial Estate Dublin 24 Ireland
Tesco TM: Celine Linney
Design Manager: Claire Payne PM Contact: Karen Waller
Design Agency: N/A
PQM for Spot colour evaluation
(Printer will be evaluated under below criteria)
All measurements will be digital inclusive of varnish and substrate. NOTE: Measurements taken pre-lamination Device: Spectrophotometer (Xrite Exact or Spectro Eye) Netprofiled Software: Colour IQC (All measurements taken via software, not directly from device)
Illuminate: D50 Whitebase: Absolute Angle: 2 Degrees Filter: None Delta E Formula: 2000 Tolerance: <2.00
NOTE: Pantone colours will be evaluated to digital Pantone + libraries (Do not visually evaluate to pantone book) Special colours will be evaluated to cxf data (this will be provided with hard copy visual sample) Sample request:
Please provide full press sheet and 6 fully die-cut